Step 1: Launch D-ViewCam and click
Schedule Configuration
Step 2: Select the
camera(s) you want to apply the recording schedule to, select or create a
schedule (by default it is 24 Hours) and click
Configure
Step 3: Under Mode, ensure
Always Record is selected
Step 4: Under the Time Section, specify the time when you want the recording to occur and click OK.
Note: If you want to record Audio, ensure to select
"Record Audio" from the audio section
Click OK to close the Encoding Options and
Click OK again to Close the Schedule Configuration.
Step 5: Click the
Start Menu and click
Start Recording Schedule
Note: A
Red circle will appear in the top right corner of each camera with Recording Configured. This indicates that it is recording.
