Step 1: Launch D-ViewCam and click
Schedule Configuration
Step 2: Select the
camera(s) you want to apply the motion detection rule to, select or create a
schedule (by default it is 24 Hours) and click
Configure
Step 3: Under Mode, Select
Record on Motion
Step 4: Under the
Original Video Box, Draw a box or multiple boxes around what you want to monitor for motion.
Click OK to close the Encoding Options and Click OK again to Close the Schedule Configuration.
Step 5: Click the Start Menu and click Start Recording Schedule
A Circle will appear in the top right corner of each camera with Recording Configured.
- Green = No Motion Detected
- Red= Motion Detected
