Nuclias Connect AC1200 Wave 2 Wall-Plate Access Point
DAP-2620

Easy-to-deploy Wall-Plate Access Point suitable for diverse network scenarios.

Indoor - Wall
  • Dual-band throughput of up to 1167Mbps
  • IEEE 802.11ac Wave 2 wireless
  • 2 x 2 MU-MIMO over two spatial streams
  • 1 x Gigabit Ethernet port
  • Phone line port for voice communications
  • IEEE 802.3af Power over Ethernet (PoE) for tidier, less-wires setup
  • Supports WPA2™ - WiFi security for more protection
  • MAC Filtering and WLAN Partitioning
  • Quality of Service (QoS) prioritizes network traffic, minimizing the impact of busy bandwidth
  • Supports up to 16 SSIDs
  • Wall plate design that easily blends into surroundings

Indoor - Wall
  • Dual-band throughput of up to 1167Mbps
  • IEEE 802.11ac Wave 2 wireless
  • 2 x 2 MU-MIMO over two spatial streams
  • 1 x Gigabit Ethernet port
  • Phone line port for voice communications
  • IEEE 802.3af Power over Ethernet (PoE) for tidier, less-wires setup
  • Supports WPA2™ - WiFi security for more protection
  • MAC Filtering and WLAN Partitioning
  • Quality of Service (QoS) prioritizes network traffic, minimizing the impact of busy bandwidth
  • Supports up to 16 SSIDs
  • Wall plate design that easily blends into surroundings

Specifications

Dimensions 153.5 x 94.65 x 35.8 mm
Environment Indoor
2.4GHz Speed 300Mbps
5GHz Speed 867Mbps
MU-MIMO and Tx beamforming Yes
Maximum Output Power 2.4GHz: 20 dBm / 5GHz: 20 dBm
Interface Back Panel : One Giga PoE in Ethernet Port + One RJ11 for uplink Bottom Panel : One Giga Ethernet Port + One RJ11 for downlink
Mounting Wall
PoE Mode 802.3af
Nuclias Connect

Free Nuclias Connect Remote Centralized Management Software

D-Link’s Nuclias Connect is a centralized management and analytics solution that brings convenience, control, customizability and cost-effective scaling to SMB (small-medium-sized business) networks. It enables network monitoring, management, and device configuration through a single, easy-to-use software interface.

What’s more – it’s free to download and there are no licensing or support fees. Easily manage your network, anytime, anywhere.


  • Access Point
  • Wireless Client
  • WDS
  • WDS with APs

Multi-Mode Makes the Most of your Network Capabilities

In order to achieve optimal network performance, the DAP-2620 has several operational modes tailored to best fit the individual needs of your network. Access Point, Wireless Client, WDS (Wireless Distribution System), and WDS with Access Point modes allow for flexible, customizable deployment whatever your requirements.

  • Access Point
    Add wireless access to your existing wired network.
  • Wireless Client
    Add wireless functionality to a device which does not have a Wi-Fi adapter.
    *Note: this should only be 1 device connected to the DAP.
  • WDS
    Wirelessly connect two separate networks.
  • WDS with AP
    Wirelessly connect two separate networks while also providing wireless access to both networks.
DAP-2620

Get Your Network Up to Speed

The DAP-2620 is built to handle bandwidth-intensive applications involving numerous clients. It delivers high-speed Wave 2 wireless connection reliably, with maximum wireless signal rates of up to 1167Mbps, and 2 x 2 MU-MIMO with two spatial streams. Performance is further optimized via the Nuclias Connect platform which adjusts the DAP-2620’s channel selection, transmission power, and maximum number of client connections.

Take a Load Off and Let Your AP do the Hard Work

The DAP-2620’s Load Balancing feature spreads the work load between two or more Access Points to get optimal resource utilization, throughput and response time, while Airtime Fairness helps distribute equal amounts of air time to each connected client. Band Steering auto-connects devices such as smart phones and tablets to the higher-capacity 5 GHz band while allowing devices 2.4 GHz-ready to remain. The result is a steady, consistent connection for each user – the perfect balancing act.

video
message
phone
download
mail
music
wi-fi signal DAP-2620
wi-fi signal DAP-2620

Expand your Network with
    Budget in Mind
Expand your Network with
    Budget in Mind
Expand your Network with
    Budget in Mind
Expand your Network with
    Budget in Mind
Expand your Network with
    Budget in Mind
Expand your Network with
Budget in Mind

Nuclias Connect’s evolving software-based management capabilities allow you to invest in the DAP-2620 confident that as your business expands, your network will, too. Manage up to 1000 Access Points from a single central location, wherever you are, whenever you want. 

Industrial Design Redefined

The DAP-2620 perfectly marries industrial grade materials with subtle, clean-line design. Its fresh white housing blends well into any indoor space, while its soft, rounded corners ensure an elegant integration wherever it’s placed.

Cloud network management with ease
DAP-2620

Peak Performance and Discreet Deployment with Power over Ethernet (PoE)

The DAP-2620’s (PoE) function allows for easy installation and a simple, clean setup. No need to run extra power lines, no added hassle when configuring your hardwiring and no more cable clutter. Perfect for advanced installations in areas where power outlets are not readily available.

Make Every Second Count

The DAP-2620 not only delivers reliable wireless performance with maximum wireless signal rates of up to 300 Mbps in the 2.4 GHz band and 867 Mbps in the 5 GHz band. Quality of Service (QoS) support also enhances your network’s efficiency. QoS cleverly prioritizes network traffic so that time-sensitive data, such as VoIP or high-quality video streaming, are unaffected even during bursts of high data traffic. This allows for an all-round smoother, uninterrupted Wi-Fi experience.

Complete Control over your Network’s Access

Complete control comes as standard with the DAP-2620. Combined with the Nuclias Connect Software, a variety of the latest in network security and management tools are at your fingertips. You can rest assured that the best of the best are hard at work keeping your network protected and hitch free.

  • 128bit Personal and Enterprise Wireless Encryption
    Supports WPA2™ - WiFi security for more protection
  • RADIUS
    RADIUS
    Eliminate shared passwords with unique credentials for each employee
  • Customizable Captive Portal
    Customizable Captive Portal
    Separate guest and employee access
  • MAC Filtering – Limit what devices can connect
  • Rogue AP Detection – Guard against unauthorized Access Point installation
  • Wireless LAN Segmentation – Better bandwidth utilization
  • Wireless Isolation – Limit what users access on the local network
  • Wireless Broadcast Scheduling – Automate when your network is available
  • SSID Broadcast Disabling – Hide your wireless for an extra layer of security

small office

Big Things Start Small

Networks big or small all have to start somewhere, with devices sometimes having to take on duties that would not normally be expected of them. For the DAP-2620 that is not a problem since its stand-alone capabilities mean it can take on multiple roles effortlessly. It can be deployed within a small office or classrooms, for example, to create or expand the capacity of a wireless network.

The Beating Heart of Your Network

The Beating Heart of Your Network

At the heart of your network is the DNH-100 Wireless Controller, or ‘The Hub’. It centralizes all aspects of your Access Points’ provisioning and management, allowing them to work together as a team. Features such as self-organizing, self-optimizing and self-healing keep the network performing at its peak.

Learn more about the DNH-100 now

Nuclias Connect Access Points Comparison

Product
Nuclias Connect APs Series
Environment
Wireless Standard
2.4 GHz Radio Rate
5 GHz Radio Rate
PoE Support
Ports
Firmware Version Required for Nuclias Connect
Nuclias Connect APs Series
<%= environment %>
Indoor
Indoor
Indoor
<%= wireless_standard %>
11n
11n
11n
<%= prex_24_ghz_radio_rate %>
Up to 300 Mbps
Up to 300 Mbps
Up to 300 Mbps
<%= prex_5_ghz_radio_rate %>
-
-
-
<%= poe_support %>
802.3af
802.3af
802.3af
<%= ports %>
1 x 10/100 Fast Ethernet
1 x 10/100/1000 Gigabit Ethernet
1 x 10/100/1000 Gigabit PoE Ethernet
<%= firmware_version_required_for_nuclias_connect %>
v2.00
v3.00
v3.00