The DMS-1100-10TS features eight 2.5 Gigabit PoE ports and two dedicated SFP+ Ports, offering an impressive 80 Gbps total switching capacity. It is perfect for a deployment of Wave 2 Access Points, while the uplink ports provide more than enough bandwidth when accessing the larger local network.
The DMS-1100-10TS is a future-ready solution, designed for the upcoming years of connectivity. As more businesses replace older Ethernet with 2.5G to support increasingly powerful Access Points, you can rest assured this switch will keep on serving you well.
It is also a big deal for your CAPEX thanks to backwards compatibility. It can push Cat 5e cabling to its limit, allowing 2.5 Gigabit connectivity over it, so you get the absolute most out of your existing cabling.
Allay your deployment fears. With the free D-Link DNA app, first time setup is a breeze, with your device up and going in minutes.
When data is running smoothly, so does your business. The DMS-1100 Series is packed with Layer 2 features for a more efficient network and rapid troubleshooting abilities.
Effectively streamlines pathways between complex networks that include several switches, maintaining speedy and safe transmission of data
Data being transmitted and then erroneously retransmitted continuously can paralyze the network, but this feature keeps a watchful eye out, stopping potential loops in their tracks.
Observe and monitor network traffic, with only the most minimal burden on the network.
If you have surveillance cameras or related devices attached to your network, putting them onto their own VLAN keeps surveillance footage running seamlessly. The DMS-1100 Series intelligently sorts surveillance traffic automatically into a separate VLAN. It can also head off a variety of malicious attacks by isolating sensitive areas of the network.
|
Interfaces
|
8 x 2.5GBase-T 2 x 10G SFP+ Auto MDI/MDIX |
|---|---|
|
Switching Capacity
|
80 Gbps |
|
Maximum Forwarding Rate
|
59.52 Mpps |
|
Store & Forwarding Forwading
|
Yes |
|
Weight
|
2.53KG |
|
Dimensions
|
440 x 210 x 44 mm |
|
Temperature
|
Storage: - 40 ~ 70 °C Operating: -5 to 50° C (23 to 122° F) |
|
Humidity
|
Operating: 0% - 95% RH Storage: 0% - 95% RH |
|
Max Power Consumption
|
33.7 W |
|
Operating Altitude
|
2000 m |
|
Standby Power Consumption
|
21.6 W |
|
Maximum Heat Dissipation
|
113.73 BTU/hr (100V) 114.96 BTU/hr (240V) |
|
MTBF
|
378,023.34 Hours |
|
Power Input
|
100 to 240 V AC |
|
CPU Speed
|
800MHz |
|
DRAM Size
|
256MB |
|
Flash Memory Size
|
128MB |
|
Packet Buffer Size
|
12 Mbits |
|
FAN
|
Smart Fan |
|
Energy Efficiency Ethernet (EEE)
|
Yes |
|
Comply with RoHS 6
|
Yes |
|
Power Saving
|
By Link Status By Cable Length By LED Shut-Off By System Hibernation By Port Shut-Off |
|
MAC Address Table Size
|
16K |
|
Control
|
802.3x Flow |
|
Head-of-line (HOL) Blocking Prevention
|
Yes |
|
Spanning Tree Protocol (STP)
|
IEEE 802.1D STP IEEE 802.1w RSTP |
|
Aggregation
|
8 x Link Aggregation Group Per Device 8 x Max Port Per Link Aggregation Group |
|
Jumbo Frame
|
9KB |
|
VLAN
|
802.1Q VLAN Groups Port-based VLAN Voice VLAN Asymmetric VLAN Auto Surveillance VLAN |
|
Actual performances may vary due to settings, cabling, temperature, network configuration, interface, device compatibility, environmental and on-site conditions, and other similar factors. References to power capability, signal or processing speed, signal range or distance, data encryption, storage capacity, display properties, or other performance metrics are based on optimal conditions derived from industry standards and provided for informational purposes only. Specifications may be subject to change without prior notice. |
|