- Supports both IEEE 802.3af and IEEE 802.3at Power over Ethernet (PoE) standards
- A large 60 W PoE power budget and up to 30 W of power per port
- Plug and play installation
|1000Base-T PoE Interface||4|
|Switching Capacity||16 Gbps|
|Max. Packet Forwarding Rate||11.90 Mpps|
|Store & Forwarding Forwading||Yes|
|Dimension||150 x 98 x 28 mm (5.90” x 3.85” x 1.10 in”)|
|Operation Temperature||0 ~ 50 °C for device 0 ~ 40 °C for external power adaptor|
|Storage Temperature||- 40 ~ 70 °C|
|Operation Humidity||0% ~ 95% RH|
|Storage Humidity||0% ~ 90% RH|
|Maximum Power Consumption||74.2 Watts|
|Standby Power Consumption||0.26 Watts|
|Maximum Heat Dissipation||41.602 BTU/h|
|Power Input||100-240V AC|
|Flash Memory Size||512Kbits|
|Packet Buffer Size||1.5Mbits|
|Comply with RoHS 6||Yes|
|Energy Efficiency Ethernet (EEE)||Yes|
|Power Saving By Link Status||Yes|
|Power Saving By Cable Length||Yes|
|Maximum PoE Budget||60 W (30 W max. per PoE port)|
|MAC Address Table Size||4K|
|802.3x Flow Control||Yes|
|Head-of-line (HOL) Blocking Prevention||Yes|
|Jumbo Frame||9216 Bytes|
The D-Link DGS-1008P enables both home and office users to connect Power over Ethernet (PoE) devices such as wireless access points, IP cameras, and IP phones to your network in remote locations without the need for external adapters. Built with home and small business users in mind, the DGS-1008P is compact and operates silently, making it ideal for virtually any room or office.
The DGS-1008P features Auto-MDI/MDI-X support on all ports which removes the need for crossover cables when connecting to another switch or hub. Auto-negotiation on each port intelligently adjusts the port speed for optimal compatibility with the connected device. With wire-speed filtering and store-and-forward switching, the DGS-1008P maximizes network performance while minimizing the transmission of bad network packets.
Compact and Silent
The DGS-1008P has a compact design, meaning it can be placed virtually anywhere, including small offices and work spaces where space is at a premium. The desktop form-factor provides everything you need to set up a new network, or expand an existing network by connecting it to other switches. The fanless design ensures silent operation, making the switch suitable for office spaces, work floors, and noise-sensitive areas such as meeting rooms.
Power over Ethernet
The DGS-1008P features four 10/100/1000BASE-T ports that support the IEEE 802.3af and IEEE 802.3at PoE protocols, enabling these ports to supply up to 30 W of power to connected devices for a total PoE power budget of 60 W. This allows compatible devices to be connected without requiring an additional power supply, saving on cabling and allowing devices to be installed in locations without immediate access to power outlets.
D-Link Green Technology
The DGS-1008P features green technology, including IEEE 802.3az Energy-efficient Ethernet (EEE), link status detection, and cable length detection. Energy-efficient Ethernet dynamically reduces the power consumption of the switch when network utilization is low, reducing the cost of ownership during periods of inactivity. Link status detection automatically powers down ports when there is no link detected, saving power when the connected device has been shut down or disconnected. Cable length detection automatically adjusts the power output of the port based on the length of the cable, reducing the power requirements of the switch to only what is necessary for the installation.