How do I configure the wireless settings on my DWL-810 wireless bridge?
Step 1 Open your web browser and enter the IPaddress of the DWL-810 (192.168.0.30). Enter your username (admin)and your password (nothing) if any. ClickOK.
Step 2 Click on Wireless.
Operation Mode: Use Ad-Hoc ifconnecting to another DWL-810 or a wireless network adapter. Ifconnecting to an access point or a wireless router, useInfrastructure (default).
SSID: Enter the SSID (Service Set Identifier). TheSSID can be up to 32 numbers and/or letters and is case-sensitive.The SSID must be the same on all wireless nodes on the wirelessnetwork. The default SSID is default.
Channel: If in Ad-Hoc mode, make sure the channelis the same as the other wireless nodes. You do not have to set thechannel if in Infrastructure mode.
Transmission Rate: Select the speed (transferrate). For best results, use Automatic.
WEP Enabled: Check if using WEP encryption.
WEP Key Length: If using encryption, choose whatlevel - 64-bit or 128-bit.
Deny Unencrypted Data: If using encryption, checkthis box to deny any request that is not encrypted.
Shared Key Authentication: Check box only whenusing encryption.
Step 3 Click Apply to savesettings.