How do I configure remote management?

Note: This FAQ will demonstrate how toconfigure remote management using HTTP and HTTPS.

Step 1: Open a web browser and type the IPaddress of the firewall into the address bar (default is192.168.1.1). Press Enter.

Step 2: The default username is admin (alllower case) and the password is admin (all lower case). Click onOK.

Step 3: Click on the plus sign next to Systemand then select Remote Management.

Step 4: Click on Add and then select HTTP/HTTPSmanagement from the dropdown menu.

Step 5: Configure the remote management asfollowed:

* Name: enter name as desired

* HTTP: check to enable

* HTTPS: check to enable

* User Database: AdminUsers.

* Access Level: Admin.

* Interface: select the interface to be given remote managementaccess to (wan in this example)

* Network: select the corresponding network for the selectedinterface (all-nets in this example)

Click on OK.

Step 6: Click on the Configuration tab andselect Save and Activate from the dropdown menu. Click on OK toactivate and save the changes.

Rank: 1.5