How do I open ports on my DIR Series router?
To allow traffic from the internet to enter your local network, you will need to open up ports or the router will block the request.
Note: Due to NAT (Network Address Translation), you can only open a specific port or ports to one computer at a time, using our routers. For example: If you have 2 web servers on your network, you cannot open port 80 to both computers. You will need to configure 1 of the web servers to use port 81 (or any other non-80 port). Now you can open port 80 to the first computer and then open port 81 to the other computer.
Step 1: Open your web browser and type in the IP address of the router (192.168.0.1 by default). Enter the username (admin by default) and password (blank by default), and then click OK.
Step 2: Click on the ADVANCED tab and select VIRTUAL SERVER.
Step 3: Check the box beside the rule to enable the rule. For pre-defined applications, use the Application Namedropdown menu and click on the arrow button next to the dropdown menu to auto-fill the appropriate field. For non pre-defined applications not specified in the router, please enter the desired port.
Step 4: Select the computer or device from the list of DHCP clients in the Computer Name dropdown menu or manually enter the IP address of the device you want to open the specified port for.
Step 5: Click on Save Settings.
Inne pomocne materiały:
- How do I log into my router? Przeczytaj
- How do I view which websites have visited through my mydlink router? Przeczytaj
- How do I change my Cloud Router's wireless settings? Przeczytaj
- How do I change my routers IP Address? Przeczytaj
- How do I change the 802.11 Mode on my DIR series router? Przeczytaj
- How do I change the login password to my DIR router? Przeczytaj
- How do I configure DHCP reservation on my DIR series router? Przeczytaj
- How do I configure Dynamic DNS on my DIR Series router? Przeczytaj
- How do I configure Email Notification on my DIR series router? Przeczytaj
- How do I configure global QoS on my DIR series router? Przeczytaj
- How do I configure INBOUND FILTERS on my DIR Series Router? Przeczytaj
- How do I configure MAC filtering on my DIR/WBR series router? Przeczytaj
- How do I configure SharePort Web Access on my DIR Series Router? Przeczytaj
- How do I configure the QOS rules on my DIR Series Router? Przeczytaj
- How do I configure WISH on my DIR Series router to enhance my wireless network? Przeczytaj
- How do I create schedules on my DIR series router? Przeczytaj
- How do I disable the Wireless on my DIR Series Router? Przeczytaj
- How do I disable UPnP on my DIR Series Router? Przeczytaj
- How do I enable remote management on my DIR series router? Przeczytaj
- How do I open/change NAT settings for my Playstation 3 using my DIR series router? Przeczytaj
- How do I remove/block users from my wireless network on my mydlink router? Przeczytaj
- How do I reset my DIR Series router to factory default from the web-based configuration? Przeczytaj
- How do I secure the wireless signal of my DIR Series Router? Przeczytaj
- How do I setup Website Filtering on my DIR series router? Przeczytaj
- How do I view which websites have visited through my mydlink router? Przeczytaj
- How to hard reset my router to default settings? Przeczytaj
- I have forgot my wireless password, how do I recover it? Przeczytaj
- What is the button on the side of my router used for? Przeczytaj
- What can I do if the router always shows "Loading" on mydlink portal? Przeczytaj