How do I configure INBOUND FILTERS on my DIR Series Router?

When you use the Virtual Server, Port Forwarding, or Remote Administration features to open specific ports to traffic from the Internet, you could be increasing the exposure of your LAN to cyberattacks from the Internet.

In these cases, you can use Inbound Filters to limit that exposure by specifying the IP addresses of internet hosts that you trust to access your LAN through the ports that you have opened. You might, for example, only allow access to a game server on your home LAN from the computers of friends whom you have invited to play the games on that server.

Inbound Filters can be used for limiting access to a server on your network to a system or group of systems. Filter rules can be used with Virtual Server, Gaming, or Remote Administration features. Each filter can be used for several functions; for example a "Game Clan" filter might allow all of the members of a particular gaming group to play several different games for which gaming entries have been created. At the same time an "Admin" filter might only allows systems from your office network to access the WAN admin pages and an FTP server you use at home. If you add an IP address to a filter, the change is effected in all of the places where the filter is used.

 

Below is a list of each option with a description of its use:


Add/Edit Inbound Filter Rule  Here you can add entries to the Inbound Filter Rules List below, or edit existing entries.

Name  Enter a name for the rule that is meaningful to you.

Action The rule can either Allow or Deny messages.

Source IP Range  Define the ranges of Internet addresses this rule applies to. For a single IP address, enter the same address in both the Start and End boxes. Up to eight ranges can be entered. The Enable checkbox allows you to turn on or off specific entries in the list of ranges.

Save  Saves the new or edited Inbound Filter Rule in the following list. When finished updating the Inbound Filter Rules List, you must still click the Save Settings button at the top of the page to make the changes effective and permanent.

Inbound Filter Rules List  The section lists the current Inbound Filter Rules. An Inbound Filter Rule can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Edit Inbound Filter Rule" section is activated for editing.

In addition to the filters listed here, two predefined filters are available wherever inbound filters can be applied: 
Allow All  Permit any WAN user to access the related capability.

Deny All  Prevent all WAN users from accessing the related capability. (LAN users are not affected by Inbound Filter Rules.)

Rank: 1.5

Inne pomocne materiały:

  • How do I log into my router? Przeczytaj
  • How do I view which websites have visited through my mydlink router? Przeczytaj
  • How do I change my Cloud Router's wireless settings? Przeczytaj
  • How do I change my routers IP Address? Przeczytaj
  • How do I change the 802.11 Mode on my DIR series router? Przeczytaj
  • How do I change the login password to my DIR router? Przeczytaj
  • How do I configure DHCP reservation on my DIR series router? Przeczytaj
  • How do I configure Dynamic DNS on my DIR Series router? Przeczytaj
  • How do I configure Email Notification on my DIR series router? Przeczytaj
  • How do I configure global QoS on my DIR series router? Przeczytaj
  • How do I configure MAC filtering on my DIR/WBR series router? Przeczytaj
  • How do I configure SharePort Web Access on my DIR Series Router? Przeczytaj
  • How do I configure the QOS rules on my DIR Series Router? Przeczytaj
  • How do I configure WISH on my DIR Series router to enhance my wireless network? Przeczytaj
  • How do I create schedules on my DIR series router? Przeczytaj
  • How do I disable the Wireless on my DIR Series Router? Przeczytaj
  • How do I disable UPnP on my DIR Series Router? Przeczytaj
  • How do I enable remote management on my DIR series router? Przeczytaj
  • How do I open/change NAT settings for my Playstation 3 using my DIR series router? Przeczytaj
  • How do I open ports on my DIR Series router? Przeczytaj
  • How do I remove/block users from my wireless network on my mydlink router? Przeczytaj
  • How do I reset my DIR Series router to factory default from the web-based configuration? Przeczytaj
  • How do I secure the wireless signal of my DIR Series Router? Przeczytaj
  • How do I setup Website Filtering on my DIR series router? Przeczytaj
  • How do I view which websites have visited through my mydlink router? Przeczytaj
  • How to hard reset my router to default settings? Przeczytaj
  • I have forgot my wireless password, how do I recover it? Przeczytaj
  • What is the button on the side of my router used for? Przeczytaj
  • What can I do if the router always shows "Loading" on mydlink portal? Przeczytaj