How do I configure DHCP server on my DWL-1750?
Step 1 Open a web browser and type the IP addressof the DWL-1750 in the address bar (default is 192.168.1.50wireless and 192.168.0.50:2000 wired). PressEnter.
Step 2 The default username isadmin (all lower case) and the default password isblank (nothing). Click OK.
Step 3 Click the Home tab andthen click DHCP to the left.
Note: If you are connecting to a DHCP server, theDHCP server on the DWL-1750 should be disabled.
Step 4 By default, DHCP Server is set toDisabled. To enable it, click theEnable radio button.
Step 5 Enter the default gateway, net mask, andthe starting and ending IP address in the corresponding fileds. Tochange the lease time, select a value using the drop-down list nextto Lease Time.
Note: The value for DHCP Start IPmust be less than the value for DHCP End IP.
Step 6 Select the interface that you want DHCPserver to dynaically assign IP addresses to by selecting either theWireless or Ethernet radiobutton.
Step 7 Click Apply and then clickContinue to save the new settings.