How do I configure SharePort Web Access on my DIR Series Router?

Note: If using a D-Link?Mobile router, SharePort Mobile is only compatible in Router and Wifi-Hotspot Mode


Note: In this example we are using the DIR-506L, however, these instructions can be used on any D-Link router that supports SharePort Mobile

Step 1: Insert your USB Flash Drive into your Router


Router Configuration 

Step 2: Log into your router:

Open a web browser and enter the IP address of your router or enter http://dlinkrouter in the address bar. By default the IP address is

The default username is admin and there is no password

Step 3: Click on the Setup Tab and click Storage on the left side

Step 4: Check Enable SharePort Web Access and make note of the HTTP Access Port. This Port will be needed to access the SharePort Web Application. By default the port is 8181

Click Save Settings

Accessing SharePort Web Application

Step 5: Open a new web browser and enter the IP address of your router:HTTP Access Port

Note: if accessing from the Internet, you need to enter the routers WAN IP : Port

Rank: 1.5

Това също може да Ви помогне: