How to hard reset NAS Storage device to default settings?
To hard reset your NAS Storage device, you can reset the NAS by press the RESET button or use the reset function in NAS web interface.
1. Make sure the NAS is well connected to the internet.
2. Use an unfolded paperclip to press and hold the RESET button for at least 20 seconds and wait until the LED turn green.
3. Or you may go to the device web interface by keying in the device IP on the browser
4. Go to System Management->System Settings to restore the NAS to default.
1. Make sure the NAS is well connected to the internet.
2. Use an unfolded paperclip to press and hold the RESET button for at least 20 seconds and wait until the LED turn green.
3. Or you may go to the device web interface by keying in the device IP on the browser
4. Go to System Management->System Settings to restore the NAS to default.
307 Други потребители намират това за полезно.
Беше ли това полезно за Вас?307 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.
Това също може да Ви помогне:
- How do I set up my ShareCenter Cloud Storage (NAS) device? Прочети отговорите
- What can I do if the wizard can NOT find NAS? Прочети отговорите
- How do I download mydlink Access-NAS? Прочети отговорите
- I'm getting errors when trying to download files from my ShareCenter. Прочети отговорите
- I'm getting errors when trying to upload files to my ShareCenter. Прочети отговорите
- I’m using Safari 6.1 or higher, and I can’t see any files on my NAS. Прочети отговорите