How do you setup Scheduled Recording in D ViewCam
Step 1: Launch D-ViewCam and click Schedule Configuration
![User-added image](http://sim.dlink.ca/images/faqs/How_do_you_setup_scheduled_Recording_in_DViewCam/step1.jpg)
Step 2: Select the camera(s) you want to apply the recording schedule to, select or create a schedule (by default it is 24 Hours) and click Configure
![User-added image](http://sim.dlink.ca/images/faqs/How_do_you_setup_scheduled_Recording_in_DViewCam/step2.jpg)
Step 3: Under Mode, ensure Always Record is selected
Step 4: Under the Time Section, specify the time when you want the recording to occur and click OK.
Note: If you want to record Audio, ensure to select "Record Audio" from the audio section
![User-added image](http://sim.dlink.ca/images/faqs/How_do_you_setup_scheduled_Recording_in_DViewCam/step4.jpg)
Click OK to close the Encoding Options and Click OK again to Close the Schedule Configuration.
Step 5: Click the Start Menu and click Start Recording Schedule
![User-added image](http://sim.dlink.ca/images/faqs/How_do_you_setup_scheduled_Recording_in_DViewCam/step5.jpg)
Note: A Red circle will appear in the top right corner of each camera with Recording Configured. This indicates that it is recording.
![User-added image](http://sim.dlink.ca/images/faqs/How_do_you_setup_scheduled_Recording_in_DViewCam/step6.jpg)
![User-added image](http://sim.dlink.ca/images/faqs/How_do_you_setup_scheduled_Recording_in_DViewCam/step1.jpg)
Step 2: Select the camera(s) you want to apply the recording schedule to, select or create a schedule (by default it is 24 Hours) and click Configure
![User-added image](http://sim.dlink.ca/images/faqs/How_do_you_setup_scheduled_Recording_in_DViewCam/step2.jpg)
Step 3: Under Mode, ensure Always Record is selected
Step 4: Under the Time Section, specify the time when you want the recording to occur and click OK.
Note: If you want to record Audio, ensure to select "Record Audio" from the audio section
![User-added image](http://sim.dlink.ca/images/faqs/How_do_you_setup_scheduled_Recording_in_DViewCam/step4.jpg)
Click OK to close the Encoding Options and Click OK again to Close the Schedule Configuration.
Step 5: Click the Start Menu and click Start Recording Schedule
![User-added image](http://sim.dlink.ca/images/faqs/How_do_you_setup_scheduled_Recording_in_DViewCam/step5.jpg)
Note: A Red circle will appear in the top right corner of each camera with Recording Configured. This indicates that it is recording.
![User-added image](http://sim.dlink.ca/images/faqs/How_do_you_setup_scheduled_Recording_in_DViewCam/step6.jpg)
70 Други потребители намират това за полезно.
Беше ли това полезно за Вас?70 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.
Това също може да Ви помогне:
- How do I add a camera in D View Cam v3 x Прочети отговорите
- How do I change the storage location in D ViewCam v3 x Прочети отговорите
- How do you setup Motion Detection Recording in D ViewCam Прочети отговорите