How do I add a camera in D View Cam v3 x
Step 1: Launch the D-ViewCam Main Console.
Step 2: Click General Settings and click Settings
Step 3: Click on the Camera tab select either Search or Insert
Search
Step 4: If Choosing Search, click the Start Scan button to initiate the Search. Select each camera, enters its username and password (if any) and click OK
Insert
Step 5: If choosing Insert, you will need to manually enter the camera details.
Note: If the camera is located at a remote DNS address select the check box for DNS and enter the DNS address name.
Your Camera(s) should now be visible.
Step 2: Click General Settings and click Settings
Step 3: Click on the Camera tab select either Search or Insert
- Search- D-ViewCam will scan your network looking for your available Cameras
- Insert- User must manually enter the Camera information (IP address,make,model etc.)
Search
Step 4: If Choosing Search, click the Start Scan button to initiate the Search. Select each camera, enters its username and password (if any) and click OK
Insert
Step 5: If choosing Insert, you will need to manually enter the camera details.
Note: If the camera is located at a remote DNS address select the check box for DNS and enter the DNS address name.
Your Camera(s) should now be visible.
50 Други потребители намират това за полезно.
Беше ли това полезно за Вас?50 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.
Това също може да Ви помогне:
- How do I change the storage location in D ViewCam v3 x Прочети отговорите
- How do I setup the D ViewCam Mobile app with a PC running D ViewCam Прочети отговорите
- How do you setup Motion Detection Recording in D ViewCam Прочети отговорите
- How do you setup Scheduled Recording in D ViewCam Прочети отговорите