How do you setup Motion Detection Recording in D ViewCam
Step 1: Launch D-ViewCam and click Schedule Configuration
Step 2: Select the camera(s) you want to apply the motion detection rule to, select or create a schedule (by default it is 24 Hours) and click Configure
Step 3: Under Mode, Select Record on Motion
Step 4: Under the Original Video Box, Draw a box or multiple boxes around what you want to monitor for motion.
Step 2: Select the camera(s) you want to apply the motion detection rule to, select or create a schedule (by default it is 24 Hours) and click Configure
Step 3: Under Mode, Select Record on Motion
Step 4: Under the Original Video Box, Draw a box or multiple boxes around what you want to monitor for motion.
Click OK to close the Encoding Options and Click OK again to Close the Schedule Configuration.
Step 5: Click the Start Menu and click Start Recording Schedule
A Circle will appear in the top right corner of each camera with Recording Configured.
- Green = No Motion Detected
- Red= Motion Detected
87 Други потребители намират това за полезно.
Беше ли това полезно за Вас?87 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.
Това също може да Ви помогне:
- How do I add a camera in D View Cam v3 x Прочети отговорите
- How do I change the storage location in D ViewCam v3 x Прочети отговорите
- How do you setup Scheduled Recording in D ViewCam Прочети отговорите