How do I configure the QOS rules on my DIR Series Router?

Step 1: Open a web browser and type the IP address of the D-Link series router into the address bar (default is 192.168.0.1).

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.



Step 3: Click the Advanced tab at the top, then click QoS Engine on the left.

Step 4: Setup the QoS Engine Rules:

  • Enter a Name for your Rule
  • Enter the Priority number (1-255) in the Priority field. (1 being the highest)
  • Enter the computers/device IP address in the Local IP Range
  • Enter the ports you want to prioritze in Local Port Range
  • Leave the Remote IP Range with it’s default settings.
  • Leave the Remote Port Range with it’s default settings.
Step 5: Check mark the box pertaining to the newly entered fields. Step 6: Click on Save Settings. The above rule prioritizes HTTP (port 80) traffic to one computer (192.168.0.100)

 

Rank: 1.5

Otros usuarios también consultaron:

  • How do I log into my router? Ver respuesta
  • How do I view which websites have visited through my mydlink router? Ver respuesta
  • How do I change my Cloud Router's wireless settings? Ver respuesta
  • How do I change my routers IP Address? Ver respuesta
  • How do I change the 802.11 Mode on my DIR series router? Ver respuesta
  • How do I change the login password to my DIR router? Ver respuesta
  • How do I configure DHCP reservation on my DIR series router? Ver respuesta
  • How do I configure Dynamic DNS on my DIR Series router? Ver respuesta
  • How do I configure Email Notification on my DIR series router? Ver respuesta
  • How do I configure global QoS on my DIR series router? Ver respuesta
  • How do I configure INBOUND FILTERS on my DIR Series Router? Ver respuesta
  • How do I configure MAC filtering on my DIR/WBR series router? Ver respuesta
  • How do I configure SharePort Web Access on my DIR Series Router? Ver respuesta
  • How do I configure WISH on my DIR Series router to enhance my wireless network? Ver respuesta
  • How do I create schedules on my DIR series router? Ver respuesta
  • How do I disable the Wireless on my DIR Series Router? Ver respuesta
  • How do I disable UPnP on my DIR Series Router? Ver respuesta
  • How do I enable remote management on my DIR series router? Ver respuesta
  • How do I open/change NAT settings for my Playstation 3 using my DIR series router? Ver respuesta
  • How do I open ports on my DIR Series router? Ver respuesta
  • How do I remove/block users from my wireless network on my mydlink router? Ver respuesta
  • How do I reset my DIR Series router to factory default from the web-based configuration? Ver respuesta
  • How do I secure the wireless signal of my DIR Series Router? Ver respuesta
  • How do I setup Website Filtering on my DIR series router? Ver respuesta
  • How do I view which websites have visited through my mydlink router? Ver respuesta
  • How to hard reset my router to default settings? Ver respuesta
  • I have forgotten my wireless password, how do I recover it? Ver respuesta
  • What is the button on the side of my router used for? Ver respuesta
  • What can I do if the router always shows "Loading" on mydlink portal? Ver respuesta