SFP 1000 BASE-T Copper Transceiver
DGS-712
- Estado del producto (Revision E): Activo
Description
D-Links DGS-712 1000BASE-T Copper Small Form Pluggable (SFP) transceiver is based on the SFP Multi Source Agreement. It is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802.3z and 802.3ab. The DGS-712 plugs into any standard SFP interface allowing for 1000Base-T Gigabit transmission over standard Category 5 twisted pair copper.
D-Links DGS-712 1000BASE-T Copper Small Form Pluggable (SFP) transceiver is based on the SFP Multi Source Agreement. It is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802.3z and 802.3ab. The DGS-712 plugs into any standard SFP interface allowing for 1000Base-T Gigabit transmission over standard Category 5 twisted pair copper.
Specs
Standard
Connector
Auto MDI/MDIX
Data Rate
Cable Type
Maximum Cable Distance Coverage
Supply Current
Input Voltage
Surge Current
Dimensions (W x D x H)
Weight
Operating Temperature
Storage Temperature
Waranty
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet
- Compliant with MSA SFP Specification
- SFP (Small Form Pluggable)
Connector
- RJ-45
Auto MDI/MDIX
- Automatic crossover detection enabled
- External crossover cable not required
Data Rate
- 1,000 Mbps (IEEE 802.3 compatible)
- 1000 BASE-T operation requires the host system to have an SGMII interface with no clocks. With a SERDES interface, this transceiver will operate at 1000BASE-T only
Cable Type
- Cat. 5 twisted-pair cable
Maximum Cable Distance Coverage
- 100 meters
Supply Current
- 350mA (typical)
- 400mA (maximum)
- 1.3W max power over full range of voltage and temperature
Input Voltage
- 3.1V (minimum)
- 3.3V (typical)
- 3.5V (maximum)
- Referenced to GND
Surge Current
- 30mA
- Hot plug above steady state current
Dimensions (W x D x H)
- .47” x 2.95” x .47” (11mm x 75mm x 11mm)
Weight
- .53 lbs (0.2 kg)
Operating Temperature
- 32° to 185° F (0° to 85° C)
Storage Temperature
- -40° to 185° F (-40° to 85° C)
Waranty
- 2-Year Limited