How can I replace a failed disk drive?

This FAQ applies to the DNR-312L

If a disk drive fails, the Disk Status LED will turn to RED.
Replace the failed disk drive with a new disk drive of the same or slightly greater capacity. Please 
make sure you have powered down the unit.

Step 1: Open the unit's front cover.
Step 2: Pull out the failed disk drive.
Step 3: Install a new disk drive into the slot.
Step 4: Go to Menu -> system to format new hard disk

Rank: 1.5

These may also help:

  • What kind of Cameras can connect to NVR? Read Answer
  • What kind of Hard Drive can be used with NVR? Read Answer
  • How can I check the disk status? Read Answer
  • How can I restore the default administrator's password? Read Answer