Step 1: Launch the D-ViewCam Main Console.

Step 2: Click General Settings and click Settings

Step 3: Click on the Camera tab select either Search or Insert

• Search- D-ViewCam will scan your network looking for your available Cameras
• Insert- User must manually enter the Camera information (IP address,make,model etc.)

Search

Step 4: If Choosing Search, click the Start Scan button to initiate the Search. Select each camera, enters itsusername and password (if any) and click OK

Insert

Step 5: If choosing Insert, you will need to manually enter the camera details.

Note: If the camera is located at a remote DNS address select the check box for DNS and enter the DNS address name.

Your Camera(s) should now be visible.