How do I enable WPA-PSK on my DWL-900AP?

This FAQ is for the DWL-900AP Revision C (with firmware3.07 or higher) only. Revisions A and B currently do not supportWPA.

It is recommended to configure WPA on your wireless access pointbefore your wireless network adapters.

Step 1 Log into the web configuration of theDWL-900AP by opening up a web browser and typing in the IP addressof the Access Point (

Step 2 The default username isadmin (all lower case) and the password is blank(nothing). Click OK.

Step 3 Click on the Home tab andthen click Wireless on the left hand side.

Step 4 Select WPA-PSK using theradio buttons.

Step 5 Enter a Passphrase. Thepassphrase or key is an alpha-numeric password between 8 and 63characters long. It can include symbols (!?*&_) and spaces.Make sure you enter this key exactly the same on all other wirelessclients.

Step 6 Click on the Apply buttonthen click on the Continue button to save yoursettings.

Make sure you enter the same exact WPA Passphrase on your wirelessclients.

Rank: 1.5