Requirements:

• iPad  with mydlink Home App
• PC with Securicam Network Search Tool

ftp://ftp.dlink.eu/Products/dcs/@general/DCS_Setup-Wizard-SE.zip

Step 1 – You will need to locate the IP of the camera. There are two methods

• Using mydlink Home App – Tap on this icon:



• Tap “Information”

• Here you should see the IP of the camera – In our example: 192.168.1.195

• Using Securicam Network Tool – Click “Search”

Step 2 – Open a web browser, we recommend Internet Explorer and type the IP of the DSC-935L


 
Step 3 – You will be prompted for the “Username” and “Password”


 
Click “OK”

Step 4 – Once in the GUI of the DCS-935L, go to MAINTENANCE > Firmware Upgrade


 
Step 5 – Click on “Browse” to search for the firmware then click “Upload”



Step 6 – You must not interrupt this process at any time to avoid damaging the camera. Once the process has completed, you should see the following screen and firmware has been upgraded and completed with success