Managed Gigabit Access Switches
DGS-2000 Series
- Product Status (Revision A1_v103): Live
- Different combinations of 1000BASE-T, 100/1000 Mbps GbE/SFP combo, and 100/1000 Mbps SFP
- PoE and non-PoE variations
- Auto Surveillance and Voice VLAN detection for uninterrupted surveillance video and jitter-free VoIP calls
- Up to 30W per port with 370W total PoE power budget
- Layer 2 management and security, with Layer 3 Lite features
- Supports D-Link Network Assistant (DNA) and Web UI utilities
- Supports Command Line Interface (CLI) via Telnet or SSH
Where to buy
Why you Want it
Flexible Hardware Design
Wide range of port and media types, including 10/100/1000BASE-T RJ-45 ports, 100/1000 Mbps GbE/SFP combo ports, and 100/1000 Mbps SFP ports.
Network Security
D-Link’s innovative Safeguard Engine™ protects the switches against traffic flooding caused by malicious attacks.
Quality of Service
Auto detection for uninterrupted surveillance video and jitter-free VoIP calls
User Friendly Web GUI
Supports D-Link Network assistant, web UI utilities and command line interface (CLI) via Telnet or SSH
Layer 2 Features
Equipped with a complete lineup of L2 features, including IGMP snooping, port mirroring, spanning tree protocol(STP), and link aggregation control protocol (LACP).
Lite Layer 3 Features
Supports IP interfaces, ARP, IPv6 neighbor discovery (ND) and default routing
Switching Capacity
Up to 104 Gbps switching capacity
PoE Capable
Maximum PoE budget up to 370W
Ultra High Availability
For mission critical environments, the DGS-2000 series supports IGMP snooping, port mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfers.
Network maintenance features include loopback detection and cable diagnostics. Loopback detection significantly speeds up troubleshooting by automatically detecting and terminating switching loops.
The cable diagnostics feature, designed primarily for administrators and customer service representatives, determines the cable quality and quickly discovers errors, allowing for effortless diagnostics and maintenance.
An Added Line of Defense Against Attacks
Defend your network with D-Link’s innovative Safeguard Engine™ to neutralize threats such as malicious network flooding attacks, ARP spoofing, and bogus DHCP IP addressing. Compatible with 802.1X RADIUS server applications, port-based and host-based authentication are applied through the Access Control List (ACL) to enhance network security.
Seamless Integration for All Access Layer Requirements
The DGS-2000 Series includes a wide variety of port and media types, including 10/100/1000BASE-T RJ-45 ports, 100/1000 Mbps GbE/SFP combo ports, and 100/1000 Mbps SFP ports. The DGS-2000-10, DGS-2000-26, DGS-2000-10P and DGS-2000-10MP models feature two 100/1000 Mbps SFP ports, while all other DGS-2000 Series models feature two or four GbE/SFP combo ports, allowing you to choose the most suitable media type for your requirements.
All DGS-2000 Series PoE switches include support for IEEE 802.3af/at and higher power budgets up to 370W, allowing more PoE devices to be powered by the switch. Additionally, an extended Link Layer Discovery Protocol (LLDP) automatically negotiates and manages power fed to IEEE 802.3at PoE+ powered devices for optimal power distribution.
QoS (Quality of Service) - Unhindered Surveillance & VoIP with a Simple Click
If you need surveillance or VoIP, there is no need to build a dedicated network. Simply enable the Auto Surveillance VLAN & Auto Voice VLAN features. Your surveillance videos will always run smoothly, and your VoIP calls will be crystal-clear from beginning to end, even during peak working hours.
Versatile Management
The DGS-2000 Series comes with the D-Link Network Assistant (DNA) utility that enables administrators to remotely control their network down to the port level. The D-Link Network Assistant utility allows customers to easily discover multiple D-Link Managed Access Switches within the same L2 network segment and display them on-screen for instant access, so users do not need to change the IP address of their PC. This allows for simultaneous configuration and setup of all discovered devices, including password changes and firmware upgrades. The DGS-2000 Series also supports Command Line Interface (CLI) through Telnet, SSH and the console port.
DGS-2000 Series Comparison
 DGS-2000-10 | DGS-2000-10P | DGS-2000-10MP | DGS-2000-20 | DGS-2000-26 | DGS-2000-28 | DGS-2000-28P | DGS-2000-28MP | DGS-2000-52 | DGS-2000-52MP | |
|---|---|---|---|---|---|---|---|---|---|---|
| Interface | 8 x 10/100/1000 BASE-T Ports 2 x 100/1000 Mbps SFP Ports | 8 x 10/100/1000 BASE-T PoE Ports 2 x 100/1000 Mbps SFP Ports | 8 x 10/100/1000BASE-T PoE Ports 2 x 100/1000 Mbps SFP Ports | 16 x 10/100/1000BASE-T Ports 4 x 100/1000 Mbps GbE/SFP combo Ports | 24 x 10/100/1000BASE-T Ports 2 x 100/1000 Mbps GbE/SFP Combo ports | 24 x 10/100/1000BASE-T Ports 4 x 100/1000 Mbps GbE/SFP Combo Ports | 24 x 10/100/1000BASE-T PoE Ports 4 x 100/1000 Mbps GbE/SFP Combo Ports | 24 x 10/100/1000BASE-T PoE Ports 4 x 100/1000 Mbps GbE/SFP Combo Ports | 24 x 10/100/1000BASE-T Ports 4 x 100/1000 Mbps GbE/SFP Combo Ports | 24 x 10/100/1000BASE-T PoE Ports 4 x 100/1000 Mbps GbE/SFP Combo Ports |
| Console Port | RJ-45 Connector | RJ-45 Connector | RJ-45 Connector | RJ-45 Connector | RJ-45 Connector | RJ-45 Connector | RJ-45 Connector | RJ-45 Connector | RJ-45 Connector | RJ-45 Connector |
| Switching Capacity | 20 Gbps | 20 Gbps | 20 Gbps | 40 Gbps | 52 Gbps | 56 Gbps | 56 Gbps | 56 Gbps | 104 Mbps | 104 Mbps |
| Mac Address Table Size | 8K | 8K | 8K | 8K | 8K | 8K | 8K | 8K | 16K | 16K |
| PoE | N/A | 802.3at | 802.3at | N/A | N/A | N/A | 802.3at | 802.3at | N/A | 802.3at |
| Max PoE Budget | N/A | 65W | 130W | N/A | N/A | N/A | 193W | 370W | N/A | 370W |