How do I configure my DI-604 or DI-614 router to use my Nortel Extranet VPN using ESP IPSec?
To use your Nortel Extranet VPN software, please follow stepsbelow:
Step 1 Go into the web-based configuration on therouter (enter 192.168.0.1 in your web brower). Enter username(admin) and password (blank).
Step 2 Click on Advanced at thetop and then click on Applications on the leftside.
Step 3 Check Enable
Step 4 Enter a name (i.e. Nortel).
Step 5 Enter 500 for TriggerPort (500 - 500).
Step 6 Select Both for TriggerType.
Step 7 Enter 500 for PublicPort.
Step 8 Select Both for PublicType.
Step 9 Click Apply and thenclick on Continue when prompted.
Note: Nortel Contivity in most situations willnot work. Some users have been successful bydisabling "Keep Alives".
8 Други потребители намират това за полезно.
Беше ли това полезно за Вас?8 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.