Site Survey

Step 1 Double-click the bar graph icon in thesystem tray (the area in the lower right-hand corner of the screen,by the clock).

Step 2 Click Site Survey on theleft side and select the SSID of your wireless accesspoint or router on the right side and then clickConnect.

Step 3 Click OK.

Step 4 You will be able to view your link statusin the Link Info window.
 

 

Windows XP SP1 (or no service pack)

Step 1 Right-click the two computer monitors iconin the system tray (the area in the lower right-hand corner of thescreen, by the clock) and select View Available WirelessNetworks.

Step 2 Click Advanced.

Step 3 Uncheck Use Windows to configure mywireless network settings and clickOK.

Step 4 Double-click the bar graph icon in thesystem tray (the area in the lower right-hand corner of the screen,by the clock).

Step 5 Click Site Survey on theleft side and select the SSID of your wireless accesspoint or router on the right side and then clickConnect.

Step 6 Click OK.

Step 7 You will be able to view your link statusin the Link Info window.
 

 

Windows XP SP2

Step 1 Right-click the wireless icon in the systemtray (the area in the lower right-hand corner of the screen, by theclock) and select View Available WirelessNetworks.

Step 2 In the Wireless NetworkConnection window click Change advancedsettings on the right side below RelatedTasks.

Step 3 Uncheck Use Windows to configure mywireless network settings.

Step 4 Double-click the bar graph icon in thesystem tray (the area in the lower right-hand corner of the screen,by the clock).

Step 5 Click Site Survey on theleft side and select the SSID of your wireless accesspoint or router on the right side and then clickConnect.

Step 6 Click OK.

Step 7 You will be able to view your link statusin the Link Info window.


 

 

If your wireless network is not showing in SiteSurvey

Step 1 Double-click the bar graph icon in thesystem tray (the area in the lower right-hand corner of the screen,by the clock).

Step 2 Click Configuration on theleft side.

Step 3 Type the SSID of your wirelessaccess point or router next to SSID. Next to WirelessMode select Infrastructure and then clickApply to save your settings.