How do I configure MAC filtering on my DIR/WBR series router?
The MAC (Media Access Controller) Address filter option is used to control network access based on the MAC Address of the network adapter. A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be configured to ALLOW or DENY network/Internet access.
Step 1: Open a web browser and type the IP address of the DIR/WBR series into the address bar (default is192.168.0.1). Press Enter.
Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.
Step 1: Open a web browser and type the IP address of the DIR/WBR series into the address bar (default is192.168.0.1). Press Enter.
Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.
Step 3: Click on the Advanced tab along the top and then on Network Filter on the left-hand side.
Step 4: From the Configure MAC Filtering drop down selection select your method of MAC filtering.
-
Turn MAC Filtering OFF
-
MAC Filtering ON and ALLOW computers listed to access the network.
-
MAC Filtering ON and DENY computers listed to access the network
Step 5: Select your computer from the DHCP Client List drop-down or you can enter your computer´s MAC address manually.
Step 6: Click Save Settings to save your settings.
Dit kan ook interessant zijn:
- How do I log into my router? Lees antwoord
- How do I view which websites have visited through my mydlink router? Lees antwoord
- How do I change my Cloud Router's wireless settings? Lees antwoord
- How do I change my routers IP Address? Lees antwoord
- How do I change the 802.11 Mode on my DIR series router? Lees antwoord
- How do I change the login password to my DIR router? Lees antwoord
- How do I configure DHCP reservation on my DIR series router? Lees antwoord
- How do I configure Dynamic DNS on my DIR Series router? Lees antwoord
- How do I configure Email Notification on my DIR series router? Lees antwoord
- How do I configure global QoS on my DIR series router? Lees antwoord
- How do I configure INBOUND FILTERS on my DIR Series Router? Lees antwoord
- How do I configure SharePort Web Access on my DIR Series Router? Lees antwoord
- How do I configure the QOS rules on my DIR Series Router? Lees antwoord
- How do I configure WISH on my DIR Series router to enhance my wireless network? Lees antwoord
- How do I create schedules on my DIR series router? Lees antwoord
- How do I disable the Wireless on my DIR Series Router? Lees antwoord
- How do I disable UPnP on my DIR Series Router? Lees antwoord
- How do I enable remote management on my DIR series router? Lees antwoord
- How do I open/change NAT settings for my Playstation 3 using my DIR series router? Lees antwoord
- How do I open ports on my DIR Series router? Lees antwoord
- How do I remove/block users from my wireless network on my mydlink router? Lees antwoord
- How do I reset my DIR Series router to factory default from the web-based configuration? Lees antwoord
- How do I secure the wireless signal of my DIR Series Router? Lees antwoord
- How do I setup Website Filtering on my DIR series router? Lees antwoord
- How do I view which websites have visited through my mydlink router? Lees antwoord
- How to hard reset my router to default settings? Lees antwoord
- I have forgot my wireless password, how do I recover it? Lees antwoord
- What is the button on the side of my router used for? Lees antwoord
- What can I do if the router always shows "Loading" on mydlink portal? Lees antwoord