How to Configure a Cluster between Two (or more) - DWC-1000 and DWC-2000
Requirements:
DWC-2000 with firmware version: 4.4.0.3B101 or higher
DWC-1000 with firmware version: 4.4.1.2 or higher
Compatible with the latest firmware AP 4.2.0.x and over (DWL-8610, DWL-8600AP, DWL-6700, DWL-6610, DWL-6600AP, DWL-3600AP and DWL-2600AP)
Scenario :
2 DWC-1000/2000 cluster configured, for a total of 12 AP DWL-x600AP to manage. (This structure may depend on the number of licenses AP, max be extended to 96 access points in combination by the DWC-1000 and 1024 APs peers in association peer DWC-2000)
Preparation :
The DWC-1000/2000 has the default IP address 192.168.10.1/24 and the username "admin" and password "admin"
Change IP Address to integrate with your existing infrastructure
Ensure you have the latest firmware version for the DWC-1000/2000
Step 1 – Setting the IP address of the MASTER to 192.168.10.1/24
Step 2 – Setting the IP address of the SLAVE to 192.168.10.3/24
Step 3– Configuring WAP Profiles and SSID and MASTER
Step 4– Add the IP address of the remote controller on each
On the MASTER:
On the SLAVE:
Step 5 – Cluster configuration is to select a pair number (Peer Groupd ID) identical to both DWC and define a cluster priority. The MASTER cluster must have the highest priority than the SLAVE. For example 255 for MASTER and 1 for SLAVE
Master:
Click “Save”
Slave:
Click “Save”
Step 6 – Select the settings you want to transfer from the MASTER to the SLAVE
Master:
Note: The copy between the DWC-1000 and DWC-2000 options may vary
Click “Save”
Repeat the process on the SLAVE
Slave:
Click “Save”
Step 7 – Start the Sync MASTER / SLAVE with the “Start Sync for All Peers” button on both; MASTER and SLAVE
Check the synchronization status
Master:
Slave:
DWC-2000 with firmware version: 4.4.0.3B101 or higher
DWC-1000 with firmware version: 4.4.1.2 or higher
Compatible with the latest firmware AP 4.2.0.x and over (DWL-8610, DWL-8600AP, DWL-6700, DWL-6610, DWL-6600AP, DWL-3600AP and DWL-2600AP)
Scenario :
2 DWC-1000/2000 cluster configured, for a total of 12 AP DWL-x600AP to manage. (This structure may depend on the number of licenses AP, max be extended to 96 access points in combination by the DWC-1000 and 1024 APs peers in association peer DWC-2000)
Preparation :
The DWC-1000/2000 has the default IP address 192.168.10.1/24 and the username "admin" and password "admin"
Change IP Address to integrate with your existing infrastructure
Ensure you have the latest firmware version for the DWC-1000/2000
Step 1 – Setting the IP address of the MASTER to 192.168.10.1/24
Step 2 – Setting the IP address of the SLAVE to 192.168.10.3/24
Step 3– Configuring WAP Profiles and SSID and MASTER
Step 4– Add the IP address of the remote controller on each
On the MASTER:
On the SLAVE:
Step 5 – Cluster configuration is to select a pair number (Peer Groupd ID) identical to both DWC and define a cluster priority. The MASTER cluster must have the highest priority than the SLAVE. For example 255 for MASTER and 1 for SLAVE
Master:
Click “Save”
Slave:
Click “Save”
Step 6 – Select the settings you want to transfer from the MASTER to the SLAVE
Master:
Note: The copy between the DWC-1000 and DWC-2000 options may vary
Click “Save”
Repeat the process on the SLAVE
Slave:
Click “Save”
Step 7 – Start the Sync MASTER / SLAVE with the “Start Sync for All Peers” button on both; MASTER and SLAVE
Check the synchronization status
Master:
Slave:
Otros usuarios también consultaron:
- ¿Cómo actualizar punto de acceso por la controladora DWC-1000? Ver respuesta
- ¿Cómo aplico la nueva configuración en mis punto de acceso usando el DWC-1000? Ver respuesta
- How to Configure a Cluster between Two (or more) - DWC-1000 and DWC-2000 Ver respuesta
- How to Upgrade Firmware for Access Points with DWC-1000? Ver respuesta
- How to Add Access Point and Configuration of Profiles in the DWC-1000 – FW-4.4.x Ver respuesta
- How to Create Multi-SSIDs and VLANs - FW.4.4.x Ver respuesta
- How to Upgrade Firmware for Access Points with DWC-1000 FW.4.4.x Ver respuesta
- How to Setup Captive Portal - DWC-2000 Wireless Controller Ver respuesta
- How to Upgrade AP Firmware via TFTP Server - DWC-2000 Ver respuesta
- Cómo configurar control de ancho de banda para los clientes inalámbricos en DWC-2000 Ver respuesta