Why can´t I change the channel on my wireless router or access point?
If you cannot change the channel on your router or access point (set to channel 6), this means that Super G is enabled. Super G will always be set to channel 6 but it actually uses most of the channel range between 1 and 11, which allows increased bandwidth. If you do not want to use Super G, then disable it and this will allow you to use a specific channel.
To disable Super G, follow the steps below:
Step 1 Open your web browser and enter the IP address of the router or access point (Router - 192.168.0.1, AP - 192.168.0.50).
Step 2 Enter username (admin) and your password (blank by default).
Step 3 Click on the Advanced tab and then click Performance on the left side.
Step 4 Next to Super G Mode, select Disabled from the drop-down menu.
Step 5 Click Apply and then click Continue to save your settings.
29 Други потребители намират това за полезно.
Беше ли това полезно за Вас?29 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.