How do I reset my DWL-1700AP or DWL-1750?
Step 1 Connect the included RS-232 cable to theserial port on the back of your computer and then connect the otherend to the unit.
NOTE: Contact your reseller if your DWL-1700AP orDWL-1750 did not come with a RS-232 cable.
Step 2 Click Start >Run and type hypertrm in theRun window.
Step 3 In the Connection Descriptionwindow type a name to identify the connection next toName. Click OK.
Step 4 In the Connect To window selectthe COM port that the RS-232 cable is connected to next toConnect Using. Click OK.
Step 5 In the COM Properties windowselect 115200 next to Bits per second andNone next to Flow control. ClickApply and then click OK.
Step 6 Once a connection is established unplug thepower from the unit and then power it back on. The device shouldthen perform its startup procedures and outputtinginformation.
Step 7 Press D to reset thedevice to factory defaults.
Step 8 Confirm your selection.
Step 9 When reset is complete the default IPaddress will be 192.168.0.50.
2 Други потребители намират това за полезно.
Беше ли това полезно за Вас?2 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.