How do I configure DHCP server on my DWL-1750?
Step 1 Open a web browser and type the IP addressof the DWL-1750 in the address bar (default is 192.168.1.50wireless and 192.168.0.50:2000 wired). PressEnter.
Step 2 The default username isadmin (all lower case) and the default password isblank (nothing). Click OK.
Step 3 Click the Home tab andthen click DHCP to the left.
Note: If you are connecting to a DHCP server, theDHCP server on the DWL-1750 should be disabled.
Step 4 By default, DHCP Server is set toDisabled. To enable it, click theEnable radio button.
Step 5 Enter the default gateway, net mask, andthe starting and ending IP address in the corresponding fileds. Tochange the lease time, select a value using the drop-down list nextto Lease Time.
Note: The value for DHCP Start IPmust be less than the value for DHCP End IP.
Step 6 Select the interface that you want DHCPserver to dynaically assign IP addresses to by selecting either theWireless or Ethernet radiobutton.
Step 7 Click Apply and then clickContinue to save the new settings.
1 Други потребители намират това за полезно.
Беше ли това полезно за Вас?1 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.