How do I configure recording to the Micro SD card on my DCS 942L
To setup recording to the Micro SD Card, configuration must be performed within the Web Interface of the DCS-942L. This can be done using the Cameras IP address or using the mydlink web portal.
Option 1: mydlink Portal
Step 1: Go to http://eu.mydlink.com/ and log into your account
Step 2: Select your DCS-942L and click on the Settings Tab
Step 3: Click on Advanced Settings
Option 2: Using the Camera IP Address
Note: If you already know the IP address of your DCS-942L, skip to the next section "Configuring your DCS-942L for recording"
Step 1: Launch the Install Wizard for the DCS-942L
Step 2: Click Next until the wizard searches for your camera
Step 3: When found, record the IP address of the camera you want to configure for recording.
Configuring your DCS-942L for recording
Step 1: Open your internet browser and type the IP address of your DCS-942L into the address bar
Step 2: When prompted, enter your username and password for the camera (The default username is admin and there is no password)
Step 3: Click on the Setup Tab and then click on SD Management on the left side
Note: You must format the installed SD card to allow the DCS-942L to read it. Formatting will cause all data on the SD card to be erased.
Step 4: Click on Format SD Card
Step 5: Click on SD Recording:
Step 6: Configure recording to the SD
- Check to Enable
- Trigger by:
- Always- Record 24/7
- Motion: Record only when motion is enabled (Note: Motion detection must be configured)
- Schedule: Record on user-defined schedule
- Recording type:
- Snapshot: Record my taking snap shots
- Video: Record by capturing video
- Recording Length: Specify how long each video file will be (1-6 minutes per file)
- SD Card:
- Keep free Space: Specify how much space to leave on the SD Card (Will always leave this much room on SD Card)
- Cyclic: Selecting this option will cause the oldest folder/files to be deleted when space is needed for more recording.
Click Save Settings
Viewing/Playback
Playback can be done directly from the mydlink portal or you can download the files to a computer for local playback.
Viewing on mydlink Portal
Step 1: Log into your mydlink account at eu.mydlink.com
Step 2: Select your DCS-942L
Step 3: Click on Playback
Step 4: Select the record date and Click GO
Step 5: Select the recording to playback
Local Playback/Downloading
Step 1: Click on the Setup Tab and SD Management on the left Side
Step 2: Select the day of recording (under Name)
Step 3: Select the file to view/download
Step 4: Choose to open or save the file
Note: You must have a video player installed on your computer to playback the file (ie. Windows Media Play/VLC)
103 Други потребители намират това за полезно.
Беше ли това полезно за Вас?103 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.
Това също може да Ви помогне:
- How do I change the LAN IP address of my camera? Прочети отговорите
- How do I configure motion detection on my camera? Прочети отговорите
- How do I configure the audio settings (speaker and microphone) on my DCS-942L? Прочети отговорите
- How do I manually upgrade the firmware on my camera? Прочети отговорите
- How do I set an administrator (admin) password on my DCS-942L? Прочети отговорите
- What do I do if I forget the login username & password of my camera? Прочети отговорите