How do I set up scheduled recording in D-ViewCam?

Step 1: Launch D-ViewCam and click the Schedule Configuration icon.

D:\07869\Documents\Work\FAQ\DCS-2136L FAQ\dviewcam8.jpg

Step 2: Select the camera(s) you want to apply the recording schedule to, then create a schedule and click Configure.

D:\07869\Documents\Work\FAQ\DCS-2136L FAQ\dviewcam9.jpg

Step 3: Under Mode, ensure Always Record is selected.

Step 4: Under the Time section, specify the time when you want the recording to occur and click OK.

Note: If you want to record audio, be sure to select Record Audio from the audio section.

D:\07869\Documents\Work\FAQ\DCS-2136L FAQ\dviewcam10.jpg

Click OK to close the Encoding Options and click OK again to close Schedule Configuration.

Step 5: Click the Start Menu icon and click Start Recording Schedule.

D:\07869\Documents\Work\FAQ\DCS-2136L FAQ\dviewcam11.jpg

Note: A Red circle will appear in the top right corner of each camera with recording configured. This indicates that it is recording.

D:\07869\Documents\Work\FAQ\DCS-2136L FAQ\dvewicam12.jpg

Rank: 1.5