How do I open/change NAT settings for my Playstation 3 using my DIR series router?
Having a closed or limited NAT on your gaming console will cause a variety of issues.
The PS3 offers Type 3, Type 2 and Type 1 NAT results. These break down as follows:
Type 1 - Connected directly to the internet (no router/firewall). Should have no issues.
Type 2 - Connected through a router properly. Should have no issues.
Type 3 - Connected through a router without open ports or DMZ setup for PS3. Everything should function properly, but you may have connection, voice chat or other issues.
To obtain a NAT type 2 please ensure the following:
Your router is NOT double nat'd (connected to another router or modem/router). You can tell this by checking your D-Link's routers WAN IP address. If the IP address starts with a 192, 169, or 10 this usually means your modem is also acting as a router and is more than likely causing the problem. You would need to contact your Internet Service Provider/ modem provider to put the modem in bridge mode or to have them disable its routing features.
If your router is connected direct to a modem and is getting a proper public WAN IP address, you may need to open ports for the PlayStation 3. Typically TCP Ports: 80, 443, 5223 and UDP ports: 5223, 3478, 3479, 3658 need to be open.
Otros usuarios también consultaron:
- How do I log into my router? Ver respuesta
- How do I view which websites have visited through my mydlink router? Ver respuesta
- How do I change my Cloud Router's wireless settings? Ver respuesta
- How do I change my routers IP Address? Ver respuesta
- How do I change the 802.11 Mode on my DIR series router? Ver respuesta
- How do I change the login password to my DIR router? Ver respuesta
- How do I configure DHCP reservation on my DIR series router? Ver respuesta
- How do I configure Dynamic DNS on my DIR Series router? Ver respuesta
- How do I configure Email Notification on my DIR series router? Ver respuesta
- How do I configure global QoS on my DIR series router? Ver respuesta
- How do I configure INBOUND FILTERS on my DIR Series Router? Ver respuesta
- How do I configure MAC filtering on my DIR/WBR series router? Ver respuesta
- How do I configure SharePort Web Access on my DIR Series Router? Ver respuesta
- How do I configure the QOS rules on my DIR Series Router? Ver respuesta
- How do I configure WISH on my DIR Series router to enhance my wireless network? Ver respuesta
- How do I create schedules on my DIR series router? Ver respuesta
- How do I disable the Wireless on my DIR Series Router? Ver respuesta
- How do I disable UPnP on my DIR Series Router? Ver respuesta
- How do I enable remote management on my DIR series router? Ver respuesta
- How do I open ports on my DIR Series router? Ver respuesta
- How do I remove/block users from my wireless network on my mydlink router? Ver respuesta
- How do I reset my DIR Series router to factory default from the web-based configuration? Ver respuesta
- How do I secure the wireless signal of my DIR Series Router? Ver respuesta
- How do I setup Website Filtering on my DIR series router? Ver respuesta
- How do I view which websites have visited through my mydlink router? Ver respuesta
- How to hard reset my router to default settings? Ver respuesta
- I have forgotten my wireless password, how do I recover it? Ver respuesta
- What is the button on the side of my router used for? Ver respuesta
- What can I do if the router always shows "Loading" on mydlink portal? Ver respuesta