Step 1: Open a web browser and type the IP address of the D-Link series router into the address bar (default is 192.168.0.1).

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.

Step 3: Click the Advanced tab at the top, then click QoS Engine on the left.

Step 4: Setup the QoS Engine Rules:

• Enter a Name for your Rule
• Enter the Priority number (1-255) in the Priority field. (1 being the highest)
• Enter the computers/device IP address in the Local IP Range
• Enter the ports you want to prioritze in Local Port Range
• Leave the Remote IP Range with it’s default settings.
• Leave the Remote Port Range with it’s default settings.