How do I enable WPA-PSK on my DWL-900AP?
This FAQ is for the DWL-900AP Revision C (with firmware3.07 or higher) only. Revisions A and B currently do not supportWPA.
It is recommended to configure WPA on your wireless access pointbefore your wireless network adapters.
Step 1 Log into the web configuration of theDWL-900AP by opening up a web browser and typing in the IP addressof the Access Point (192.168.0.50).
Step 2 The default username isadmin (all lower case) and the password is blank(nothing). Click OK.
Step 3 Click on the Home tab andthen click Wireless on the left hand side.
Step 4 Select WPA-PSK using theradio buttons.
Step 5 Enter a Passphrase. Thepassphrase or key is an alpha-numeric password between 8 and 63characters long. It can include symbols (!?*&_) and spaces.Make sure you enter this key exactly the same on all other wirelessclients.
Step 6 Click on the Apply buttonthen click on the Continue button to save yoursettings.
Make sure you enter the same exact WPA Passphrase on your wirelessclients.
2 Други потребители намират това за полезно.
Беше ли това полезно за Вас?2 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.