How do I configure WPA-PSK on my DWL-G810?
To use WPA-PSK, please upgrade to firmware version 2.13 orhigher.
Step 1 Log into the web configuration of theDWL-G810 by opening up a web browser and typing in the IP addressof the DWL-G810 (default is 192.168.0.30). PressEnter.
Step 2 The default username isadmin (all lower case) and the password is blank(nothing). Click OK.
Step 3 Click the Wirelesstab.
Step 4 Next to Authentication, select theWPA-PSK radio button.
Step 5 Enter a Passphrase and re-type itin the space below. The passphrase or key is an alpha-numericpassword between 8 and 63 characters long. It can include symbols(!?*&_) and spaces.
Step 6 Click Apply then clickContinue to save the changes.
Make sure you enter the same exact WPA-PSK Passphrase on yourwireless clients.
9 Други потребители намират това за полезно.
Беше ли това полезно за Вас?9 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.