How do I configure WDS on two DWL-3200AP bridged to each other?
You will need the MAC address of the remote AP to configure yourwireless bridge.
Step 1: Connect the DWL-3200AP to your PC using anEthernet cable. Your computer will need to be in the same IPaddress range as the DWL-3200AP for configuration. The default IPaddress is 192.168.0.50.
Step 2: Open a web browser and enter in the IPaddress of the access point (http://192.168.0.50). The username isadmin (all lower case) and the password is blank(nothing).
Step 3: Click on the Home tab andthen click on Wireless on the left side. ForMode, select WDS. You can also select WDS with APif you would like to create a wireless bridge and keep the APfunctionality. Enter the Remote AP MAC Address(IE50:23:AB:D4:56:E1). Click Apply to save yoursettings.
Step 4: Repeat the instructions for the remoteaccess point. Click Apply to save yoursettings.
Note: If you have encryption enabled, ensure thekey matches on both access points. Also, ensure that both accesspoints do not have the same IP address. By default, the IP addressis 192.168.0.50.
144 Други потребители намират това за полезно.
Беше ли това полезно за Вас?144 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.