How do I enable WPA-PSK on my DWL-2100 or DWL-2200 access point?
Step 1 Log into the web-based configuration byopening up a web browser and typing in the IP address of the accesspoint (192.168.0.50).
Step 2 The default username is admin (all lowercase) and the password is blank (nothing). ClickOK.
Step 3 Click on the Advanced taband then click Encryption on the left handside.
Step 4 Click on the WPA radiobutton and then click Apply.
Step 5 Select PSK and then entera key (passphrase). The key is an alpha-numeric password between 8and 63 characters long. The password can include symbols(!?*&_) and spaces. Make sure you enter this key exactly thesame on all other wireless clients. Keep the Group KeyUpdate Interval set to 1800.
Step 6 Click on the Apply buttonto save your settings.
Note: If you are configuring your access pointfrom a wireless adapter, you will lose connectivity as soon as youclick Apply. You must enable WPA-PSK on your adapter and enter thesame exact key as you entered on your access point.
16 Други потребители намират това за полезно.
Беше ли това полезно за Вас?16 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.