How to connect Network Cameras to NVR?
This FAQ applies to the DNR-312L
If your network supports DHCP
1. Connect your Network Cameras to network and power on first.
2. Please insert the CD from the NVR package to your PC, the auto-run will bring up the Setup Wizard, please follow the instruction of the setup steps to setup NVR first.
3. Connect to NVR web page, it will automatically search and add Network Cameras.
If your network doesn't support DHCP
1. Connect your Network Cameras to network and power on first. Setup your Network Cameras with fixed IP address.
2. Please insert the CD from the NVR package to your PC, the autorun will bring up the Setup Wizard, please follow the instruction of the setup steps to setup NVR first.
1. Connect your Network Cameras to network and power on first.
2. Please insert the CD from the NVR package to your PC, the auto-run will bring up the Setup Wizard, please follow the instruction of the setup steps to setup NVR first.
3. Connect to NVR web page, it will automatically search and add Network Cameras.
If your network doesn't support DHCP
1. Connect your Network Cameras to network and power on first. Setup your Network Cameras with fixed IP address.
2. Please insert the CD from the NVR package to your PC, the autorun will bring up the Setup Wizard, please follow the instruction of the setup steps to setup NVR first.
3. Connect to NVR web page, manually input the Network Cameras IP address in the setup page.