How do I back up the Wi-Fi Extender’s configuration to my computer?

Step 1: Open a web browser and enter http://dlinkap.local in the address bar.

Step 2: Enter your Admin Password in the field provided. If you have not changed the password from the default setting, the password field should be left blank. Click Log In.

Step 3: Move the cursor to the Management tab at the top right-hand corner of the screen, then click System from the drop-down menu.

Step 4: To save the current configuration settings of your wireless router to a file, click the Save Configuration to File button. Depending on your browser, the file may be automatically saved to your ‘Downloads’ folder, or a ‘Save File’ or similar dialog box will appear, asking you where you wish to save the file.

To load a previously saved configuration file, click Select File. Once you have located the configuration file (config_rpt.bin) on your hard drive, click OK. The name of the file will be displayed next to the Select File button. Click Restore Configuration from File. A confirmation dialogue will appear, click OK to commence the loading of the configuration.

Note: If you have upgraded or downgraded the firmware on your Wi-Fi Extender, do not load configuration files that were saved using a previous firmware version. The load will not be successful, and can damage the unit.

Rank: 1.5

Ceci peut également aider.

  • Comment changer le mot de passe administrateur de mon DAP-1320 ? Lire la réponse
  • Comment changer le mot de passe de mon réseau sans fil étendu ? Lire la réponse
  • How do I change the SSID/network name of the extended networks? Lire la réponse
  • Comment réinitialiser mon Wi-Fi Extender aux paramètres d'usine par défaut? Lire la réponse