Deze website maakt gebruik van cookies. Door deze website te gebruiken, gaat u akkoord met onze Cookie Policy. Lees meer

Categorieën Veelgestelde vragen

Thank you for your feedback.

Sorry we couldn't help! Click here for more FAQs or go to Support.

How do I configure the QOS rules on my DIR Series Router?

Step 1: Open a web browser and type the IP address of the D-Link series router into the address bar (default is

Step 2: The default username is admin (all lower case) and the default password is blank (nothing). Click on OK.

Step 3: Click the Advanced tab at the top, then click QoS Engine on the left.

Step 4: Setup the QoS Engine Rules:

  • Enter a Name for your Rule
  • Enter the Priority number (1-255) in the Priority field. (1 being the highest)
  • Enter the computers/device IP address in the Local IP Range
  • Enter the ports you want to prioritze in Local Port Range
  • Leave the Remote IP Range with it’s default settings.
  • Leave the Remote Port Range with it’s default settings.
Step 5: Check mark the box pertaining to the newly entered fields. Step 6: Click on Save Settings. The above rule prioritizes HTTP (port 80) traffic to one computer (


Vond u dit nuttig?
32 mensen vonden dit nuttig
Rank: 1

Dit kan ook interessant zijn: