My Internet Service Provider is providing me with a dynamic IP address how do I configure the router?
The DI, DIR and DGL range of products are set up bydefault to receive a dynamic IP address on theInternet (WAN) port.
They only need to be plugged in and connected; no additionalsetup is required.
If you are using a cable modem and are having troubleconnecting, please try following these steps:
Step 1 Reset the router by pressing the resetbutton on the back and holding it for around 10-15 seconds. Youshould see the lights on the front of the router go offbriefly.
Step 2 Wait about a minute for the router torestart.
Step 3 Turn off the router.
Step 4 Turn off the modem.
Step 5 Wait 5-10 minutes, check the cablebetween the and modem is in place.
Step 6 Turn on the modem. Wait another minuteor until the modem indicates it is connected.
Step 7 Turn on the router.
33 Други потребители намират това за полезно.
Беше ли това полезно за Вас?33 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.