How do I configure motion detection on my camera?
Method 1:
To be used if your D-Link Cloud Camera is already registered with the mydlink Cloud Service.
Step 1: Open your web browser and enter http://www.mydlink.com/
Step 2: Enter your mydlink ID (email) and password at the login screen and click Sign in.
Step 3: Select the camera and click on the Settings tab.
Step 4: Select the Motion Detection checkbox.
Step 5: Select the detection area and sensitivity you would like using the drawing tools. Click Next to continue.
Step 6 Select the detection schedule and click Next.
Example: Always
You can also select individual days using the checkboxes, and specify a From and To time in the fields provided.
Step 6: Click finish.
Step 7: Click Save to save the current configuration and activate motion detection.
Step 8: Click Save to confirm the changes.
Method 2:
Step 1: Open a web browser and enter the IP address of the camera in the address bar (default is 192.168.0.20). Press Enter.
Step 2: The default username is admin and the password field should be left blank. Click OK.
Step 3: Click on Setup on the top menu bar.
Step 3: Click Motion Detection from the menu on the left-hand side.
Step 4: Click Enable under the Motion Detection Settings section.
Step 5: Specify whether you want to Always have motion detection enabled, or define a Schedule of your choosing. When choosing a schedule, use the checkboxes to select individual days, and specify a Start and Stop time for the schedule on each of the days selected.
Step 6: Specify how sensitive you would like motion detection to be.
Step 7: Use your mouse to define the areas of the video that you would like to monitor for motion. Clicking once on a square within the grid will select that area of the video for motion detection. Clicking the same area again will deselect the area.
Step 8: Click the Save Settings button to save the new settings.
2 Други потребители намират това за полезно.
Беше ли това полезно за Вас?2 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.
Това също може да Ви помогне:
- How do I access my mydlink camera remotely? Прочети отговорите
- How do I change the LAN IP address of my camera? Прочети отговорите
- What can I do when Active X fails to install during my mydlink camera setup? Прочети отговорите
- How do I configure the audio settings on my DCS-5020L? Прочети отговорите
- How do I enable a new camera in D-ViewCam? Прочети отговорите
- How do I manually upgrade the firmware on my camera? Прочети отговорите
- How do I mount my camera to a wall or ceiling? Прочети отговорите
- How do I reset my camera to factory default settings? Прочети отговорите
- How do I set an administrator (admin) password on my DCS-5020L? Прочети отговорите
- How do I set up and install my DCS-5020L? Прочети отговорите
- How do I set up motion detection and recording in D-ViewCam? Прочети отговорите
- How do I set up scheduled recording in D-ViewCam? Прочети отговорите