Please follow the below steps in order to set up your mydlink-enabled Cloud Camera:
Step 1: Connect one end of an Ethernet cable to the Ethernet port on your camera, then connect the other end of the cable to your local network via a router or switch, or directly to a computer for configuration.
Note: The computer used to access the camera's web-based configuration manager must be on the same subnet as the camera.
Step 2: Go to the mydlink support page and download the setup wizard specific to your device and operating system. If the setup wizard is a zip file, you will need to unzip it before running it.
Step 3: Follow the on-screen instructions to configure your Cloud Camera.