Support

FAQ Categories

Wireless Routers

How do I configure SharePort Web Access on my DIR Series Router?

Note: If using a D-Link  Mobile router, SharePort Mobile is only compatible in Router and Wifi-Hotspot Mode

Note: In this example we are using the DIR-506L, however, these instructions can be used on any D-Link router that supports SharePort Mobile

Step 1: Insert your USB Flash Drive into your Router


Router Configuration


Step 2: Log into your router:

Open a web browser and enter the IP address of your router or enter http://dlinkrouter in the address bar. By default the IP address is 192.168.0.1

The default username is admin and there is no password


User-added image

Step 3: Click on the Setup Tab and click Storage on the left side

User-added image


Step 4: Check Enable SharePort Web Access and make note of the HTTP Access Port. This Port will be needed to access the SharePort Web Application. By default the port is 8181

Click Save Settings

User-added image

Accessing SharePort Web Application

Step 5: Open a new web browser and enter the IP address of your router:HTTP Access Port
  e.g. http://192.168.0.1:8181

Note: if accessing from the Internet, you need to enter the routers WAN IP : Port
  e.g. http://24.12.134.125:8181


User-added image
 
Back to FAQs

Did you find this useful?

Copyright © 2012 D-Link Corporation/D-Link Systems, Inc.

Select countryUS