How do I install my DUB-H4 or DUB-H7 USB hub?

Note: Do NOT plug any devices in the ports of the USB hub until installation is complete. Once the hub installs, plug in your USB devices one at a time. In most cases, you will need to reinstall your USB product since Windows will detect it as a new device.

Step 1 Plug the AC adapter into the receptor located on the back panel of the hub, then plug the other end into a power strip or wall outlet.

Step 2 Plug the USB type B connector (the smaller end of the cable) into the back of the hub.

Step 3 Plug the USB type A connector (the flatter, narrow end of the cable) into an available USB 2.0 port on your computer (or USB 1.1 if you do not have USB 2.0).

Your computer will automatically detect and install the USB hub. You installation is now complete. You may now connect USB 2.0 or USB 1.1 devices to an available USB port on the front end of the USB hub.