How do I configure my DFL Series Firewall as a DHCP Server?

In This Example the following DHCP Settings are being used:
DHCP Pool: 192.168.1.100-192.168.1.150
Subnet Mask: 255.255.255.0
Gateway: Lan IP (192.168.1.1)
DNS1/DNS2: Previous Created DNS Address

Step 1: Open the web browser and type the IP address of the firewall into the address bar (default is 192.168.1.1). Press Enter.

Step 2: Click on the plus sign next to Objects and select Address Book



Step 3: Click Add and select IP Address or IP4 Host/Network.
• Name: Name as desired (DHCP_Lan_Range in the example)
• IP Address: Enter DHCP Pool (192.168.1.100-192.168.1.150 in this example).



Click OK.

Step 4: Click Add and select IP Address or IP4 Host/Network.
• Name: Name as desired (DHCP_Lan_Subnet in the example)
• IP Address: Enter DHCP Subnet (255.255.255.0 in this example).



Click OK.

Step 6: Click on the plus sign next to System, Click the plus sign next to DHCP Settings and select DHCP Server.

Step 7: Click Add and Select DHCP Server.
• Name: Name as desired (DHCP_Lan in the example)
• Interface Address: Lan
• IP Address Pool: Created in Step 3 (DHCP_Lan_Range in this Example)
• Netmask: Created in Step 4 (DHCP_lan_Subnet in this Example).





Click OK.

Step 8: Click the Options Tab.
• Default GW: lan_ip
• Domain: Leave Blank
• DNS Primary: dnsserver1_ip (Lan IP can be used if DNS is not created)
• Secondary DNS: dnsserver2_ip (None can be used if DNS address is not created)



Click OK.

Step 9: Click on the Configuration tab and select Save and Activate from the dropdown menu. Click on OK to save and activate your changes.