Cookies
Deze website maakt gebruik van cookies. Door deze website te gebruiken, gaat u akkoord met onze Cookie Policy. Lees meer
OK

Ondersteuning


Datasheets
Versie Datum Type Bestandsgrootte
-
-
-
Handleidingen
Versie Beschrijving Datum Type Bestandsgrootte
-
Show moreShow less
-
-
-
Firmware
Upgrade GEEN firmware op een D-Link product via een draadloze verbinding. Dit kan resulteren in een defect apparaat. Gebruik uitsluitend bedrade netwerkverbindingen.
Versie Beschrijving Datum
Firmware
Show moreShow less
8/10/2010
Software
Versie Beschrijving Datum
-
Show moreShow less
-
Additionele Downloads
Versie Beschrijving Datum
-
Show moreShow less
-
Support    
•    Fully Compliant with IEEE 802.3/802.3u/802.3ab/802.3z Standard
•    ANSI/IEEE 802.3 NWay auto-negotiation
•    MDI/MDI-X Auto-detection
•    IEEE 802.3x Flow Control in Full-duplex, Back Pressure in Half-duplex

DES-6500 Chassis System    
•    Number of User-configurable Slots: 8
•    2 Redundant Power Supply Bays
•    Backplane Switch Fabric Bandwidth: 160Gbps
•    Up to 96Gigabit Ethenet Ports
•    Up to 192 Fast Ethernet Ports
•    3k IP Address, 16K MAC address, 4K VLAN (max.)
•    8 Hardware Priority Queues
•    32 Trunking Group, 8 port/Group
•    RAM Buffer: 128MB per Line Card, 256MB of CPU card

DES-6502 CPU/Fabric Switching Module (Shipped with DES-6500)    
•    RS-232 Console Port (DB9) : DCE, 115200, N, 8, 1
•    Reset, Alarm Off Buttons
•    System, Power LED
•    160 Gbps Switching Capacity
•    Up to 142 Mpps Forwarding Rate Support
•    256MB SDRAM
•    512KB for Boot code and 16 MB for Runtime code

DES-6504 12 port 100BASE-FX MMF LC Module  
 
•    Fully compliant with IEEE 802.3u 100BASE-FX
•    IEEE 802.3x compliant Flow Control support for Full-duplex
•    Supports (SFF) LC type connections
•    Cable distances up to 2km in full duplex on Multi-Mode Fiber

DES-6506 24-port RJ-21 to RJ-45 Patch Panel    
•    Patch panel support 2 RJ-21 ports to 24-port RJ-45 10/100 BASE-TX Interface
•    Compatible with the DES-6510 RJ-21 Telco Module
•    Use in conjunction with DES-6510 module
•    Supports 2 RJ-21/Telco 50 connectors
•    1U high

DES-6507 12-port 10/100/1000Base-T + 2SFP Combo Module  
 
•    Fully Compliant with IEEE 802.3/802.3u/802.3ab/802.3z Standard
•    ANSI/IEEE 802.3 NWay auto-negotiation
•    MDI/MDI-X Auto-detection
•    IEEE 802.3x Flow Control in Full-duplex
•    10BASE-T Copper Cable:
•    2-pair UTP CAT 3,4, 5 (100m max)
•    EIA/TIA-568 100-ohm STP (100m max.)
•    100BASE-TX/1000BASE-T Copper Cable:
•    2-pair or 4 pair UTP CAT 5 or Better (100m max.)
•    EIA/TIA-568 100-ohm STP (100m max.)
•    Fiber Cables: 50, 62.5/125 Micron Multimode Fiber, 9 Micron Singlemode Fiber
•    LED report (per port): Link/Act

DES-6508 16-port 10BASE-T/100BASE-TX RJ-45 Fast Ethernet Switch module  
 
•    Fully compliant with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX
•    All 10/100Mbps ports support auto-negotiation
•    Back pressure Flow Control support for Half-duplex mode
•    IEEE 802.3x compliant Flow Control support for Full-duplex

DES-6509 12-port 1000Base-X SFP Fiber Module    
•    Fully Compliant with IEEE 802.3z Standard
•    IEEE 802.3x Flow Control in Full-duplex
•    Fiber Cables: 50, 62.5/125 Micron Multimode Fiber, 9 Micron Singlemode Fiber
•    LED report (per port): Link/Act

DES-6510 24 Port 10/100Mbps RJ-21 Telco 50 Module    
•    2 RJ-21, each support 12-port 10BASE-T/100BASE-TX ports
•    Fully compliant with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX
•    All 10/100Mbps ports support auto-negotiation
•    Back pressure Flow Control support for Half-duplex mode
•    IEEE 802.3x compliant Flow Control support for Full-duplex

DES-6511 Power Supply    
•    Full Redundant Feature Design
•    Hot-swappable Power Source
•    Power Management Function Enabled
•    2 Fans Included
•    Removable Handle Design
•    Input: 90 ~ 264 VAC, 47 ~ 63 Hz
•    Output: 3.3V:4A ~ 80 A; 12V: 0.1A ~2A

DES-6512 2 Port 10G XFP module for DES-6500 chassis    
•    IEEE 802.3ae compliance
•    Support Full-Duplex operation only
•    Support XFP MSA compliant transceivers
•    256MB SDRAM
•    Flash: 512KB for boot code, 16MB for runtime code
•    LED indicators

Network Cable    
•    10Base-T:
•    2-pair UTP CAT 3,4, 5
•    EIA/TIA-568 100-ohm STP
•    100Base-TX/1000Base-T:
•    2-pair or 4 pair UTP CAT 5 or Better
•    EIA/TIA-568 100-ohm STP
•    1000Base-SX:
•    50, 62.5/125 Micron Multimode Fiber
•    1000Base-LX:
•    50, 62.5/125 Micron Multimode Fiber
•    9 Micron Singlemode Fiber