What must be done to manage a DFL-210, DFL-800, or DFL-1600 using SNMP.

Step 1: First log into your DFL by visiting it´s LAN IP in your web browser of choice. The default IP is 192.168.1.1, the default username is admin and the default password is admin.

Step 2: Please click System->Remote Management

Step 3: Click Advanced Settings and check the box labeled "SNMP Before Rules", then choose the "Ok" button.



Step 4: Then click Add->SNMP management, please enter in a name of your choice and the SNMP read community you wish to use. Also select the Interface and Networks SNMP should be accessible from.



Step 5: Now let´s save our changes by choosing Configuration->Save and Activate


Now we need to walk our DFL with the SNMP management suite of your choice, we recommend the use of D-View 6.0, and will use it for this example.


Step 6: Start D-View, it will ask for a username and password, the default username is admin and the default password is 111111.

Step 7: Open MIB Compiler by choosing NetTools->MIB Tools->MIB Compiler from the top menu.



Step 8: Enter DFL´s IP in the box where is says "Browse Agent IP".

Step 9: Change Querier Options by clicking the button that looks like a hammer in front of a window next to the DFL´s IP and ensure that all of your settings are correct.



Step 10: Walk MIB by opening any of the standard MIBs on the left hand side and right clicking on any property of that MIB and choosing Get Walk.