How do I change the data rate of my DWL-2700AP?

It is recommended to configure the data rate on your wireless access point before configuring your wireless adapters. Most wireless adapters will find your wireless network by the SSID assigned to the access point, and then will automatically lock onto the data rate of the access point.

Note: It is strongly recommended to keep this setting at Auto.

Step 1 Open a web browser and type the IP address of the DWL-2700AP in the address bar (default is 192.168.0.50). Press Enter.

Step 2 The default username is admin (all lower case) and the default password is blank (nothing). Click OK.

Step 3 Click the Advanced tab and then click Performance to the left.



Step 4 Select a fixed speed using the drop-down list next to Data Rate.

Step 5 Click Apply and then click Continue to save the new settings.