How do I connect my DAP Series Access Point to my router wieless via WPS?

To connect the DAP-15XX to your wireless network using the WPS button:

Note: The DAP-15XX requires a router that supports "Push Button" WPS (Wi-Fi Protected Setup) in order to continue following this FAQ. If your router does not have the WPS function then you will have to perform the standard setup.

Step 1: Place the DAP-15XX near your router.

Step 2: Plug the power into your DAP-15XX.

Step 3: Push the WPS button to activate the connection process.

Note: WPS button is located on the side of the DAP-15XX.

Step 4: Within 120 seconds press the WPS button on the back or side of your router in order to link them together.

Step 5: Once linked, you may unplug the DAP-15XX and place it in the desired location you wish to use it.

Step 6: Power up the DAP-15XX and connect the device/devices you wish to use with the DAP-15XX.